内蒙古快3走势图

Anhui Sheng he Intelligent Machinery Co., Ltd.

全国服务热线:

18662311642

Banner
Company's Products

Company name: Anhui Sheng he Intelligent Machinery Co., Ltd.
Address: No. 7th, Chengbei Road, Huaining County Development zone, Anhui Province
Contact Person: Mr. He
Tel: 18662311642,18112661878
Fax: 0556-3510098
Website: http://www.2mbtdc.com
Company name: Kunshan Sheng Hui Precision Machinery Co., Ltd.
Add: No. 89th Hefeng Road, Shipu, Kunshan city, Jiangsu Province
Tel: 18662311642,18112661878
Fax: 0512-57405996
Email: 18662311642@163.com

新闻详情

Research on application of fluid polishing machine industry

Grinding granular flow processing is the use of viscoelastic abrasive media, under the set pressure to grind the surface several times, so as to achieve polishing and deburring special processing, such equipment is called abrasive fluid polishing machine. Sheng wo fluid polishing machine has a digital control system, high-end man-machine control interface easy to operate, imported equipment assembly, high processing efficiency, good polishing effect.

     FluidPolishingMachineIndustry Application Research

First, hydraulic products deburring processing technology research

As hydraulic products are moving towards high pressure, high speed, high power, low noise, highly integrated direction of development, to smallBetween the hole and the long diameter, the deburring at the intersection of the inner hole, the oil groove of the inner hole and the length of the hole are compared with the burr and the deep hole intersection of the complex shell parts.Burrs and other two departments to tackle the key day. The technique of deburring at the intersection of the inner hole with large diameter is solved by means of the software abrasive deburring method.The problem of surgery. and summed up and extended horizontally, the effect is obvious. and easy to operate, high efficiency, low cost.

Second, the turbine blades to remove the remelting layer of the experiment

In order to improve the cooling effect of the blades, the design of the gas film hole of the blades becomes more and more complex, and the cooling gas film hole machining of the turbine blades is an importantTechnology is critical。 Under the existing conditions, the processing of the gas film hole is further studied, and its theory of extrusion flow processing is used to test the process of extrusion flow grinding。Test method, the impeller cooling gas film hole to do the control aperture increase to remove the remelting layer of the experiment. ApertureO0。3 increase isØ0.04 O'Clock, ApertureO0。5 increaseWhen the amount is 0。02, the results of the remelting layer can be eliminated, which shows that the removal of remelting layer and microcracks by semi-solid abrasive has a very satisfactory removal effect。

The roughness comparison diagram is as follows:

  



流体抛光机


爱拼彩票充值 500万彩票 106彩票 内蒙古快3 内蒙古快三走势图 内蒙古快3走势图 106彩票 爱乐彩票充值中心 166彩票 博牛彩票开奖